收藏本站
10.7.5 Control and monitoring signals connector
9
10
CS
V_TRIM_C
Current sharing signal. When FPS-S1U racks are connected in parallel, the CS pins
of the units should be connected to allow current balance between units.
Connection for output voltage trimming of FPS1000 unit "C". The voltage can be
trimmed within its range specifications.
11
SIGNAL_RETURN Return for the following control and supervisory signals: On/Off, DC_OK,
Over_temperature Alarm, AC_Fail, Auxiliary 12V supply. The Signal return is isolated
from the output terminals.
12
13
14
15
16
17
18
19
20
21
22
DC_OK_C
+SENSE
AC_FAIL_B
ON/OFF_B
AC_FAIL_A
NC
NC
NC
SCL (I 2 C)
SDA (I 2 C)
-SENSE
Open collector signal, referenced to pin 11 (Signal Return). On when the output voltage
of FPS1000 unit "C” is higher than ≥ 80%+/-5%. The maximum sink current: 10mA
and the maximum external voltage is 15V.
Positive sensing. The +Sense signal should be connected to the positive terminal of
the load. The +Sense and -Sense leads should be twisted pair to minimize noise pick-
up effect. The maximum load wires drop compensation is 1V/wire.
Open collector signal, referenced to pin 11 (Signal Return). On when the input voltage
of FPS1000 unit "B" is ≥ 85Vrms. The maximum sink current is 10mA, and the maximum
external voltage is 15Vdc.
Turns the output of FPS1000 unit "B" to On and Off by electrical signal or dry contact
between pin 15 and pin 11 (Signal Return). 0~0.6V or Short: On, 2~15V or Open:
Off. The maximum source current is 2.6mA.
Open collector signal, referenced to pin 11 (Signal Return). On when the input voltage
of FPS1000 unit "A" is ≥ 85Vrms. The maximum sink current is 10mA, and the maximum
external voltage is 15Vdc.
Not connected
Not connected
Not connected
Serial Clock used in the I 2 C interface option. Refer to the I 2 C interface description in
the Chapter 7 in this Instruction Manual.
Serial Data used in the I 2 C interface option. Refer to the I 2 C interface description in
the Chapter 7 in this Instruction Manual.
Negative sensing. The -Sense signal should be connected to the negative terminal
of the load. The -Sense and +Sense leads should be twisted pair to minimize noise
pick-up effect. The maximum load wires drop compensation is 1V/wire.
23
TEMP_ALARM_C Open collector signal, referenced to pin 11 (Signal Return). On when the internal temperature
of FPS1000 unit "C" is within safe limit, Off approx 10 ° C below Thermal shut down. The
maximum sink current is 10mA and the maximum external voltage is 15V.
24
25
AC_FAIL_C
ON/OFF_C
Open collector signal, referenced to pin 11 (Signal Return). On when the input voltage
of FPS1000 unit "C" is ≥ 85Vrms. The maximum sink current is 10mA, and the maximum
external voltage is 15Vdc.
Turns the output of FPS1000 unit "C" to On and Off by electrical signal or dry contact
between pin 25 and pin 11 (Signal Return). 0~0.6V or Short: On, 2~15V or Open: Off.
The maximum source current is 2.6mA.
28
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
FPXLF0368-20 CRYSTAL 3.6864 MHZ 20PF SMD
FQ3225B-27 CRYSTAL 27.000 MHZ 20PF SMT
FQ5032B-18.432 CRYSTAL 18.432 MHZ 20PF SMD
FQ7050B-7.3728 CRYSTAL 7.3728 MHZ 20PF SMD
FRJ2411 CONN MOD JACK DUST CAP GREY
FRL91-23CGA3-BB79 SWITCH ROCKER DPDT 20A 12V
FRN91-27BB SWITCH ROCKER DPDT 20A 12V
FSM100 SWITCH TACTILE SPST-NO 0.05A 12V
相关代理商/技术参数
FPS100032/P 功能描述:线性和开关式电源 1000W 32V 31A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100032/S 制造商:TDK-Lambda Corporation 功能描述:Power Supply, 992 Watts 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,32V@40A,1.61" X 5" X 11.4" - Bulk
FPS100048 功能描述:线性和开关式电源 1000W 48V 21A Rear AC Input RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS1000-48 制造商:TDK 功能描述:
FPS100048/P 功能描述:线性和开关式电源 1000W 48V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100048/P-HFP 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,48V@21A,1.61" X 5" X 11.4", HAZMAT - Bulk
FPS100048/PS 功能描述:线性和开关式电源 1000W 48V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100048/PS-HFP 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,48V@21A,1.61" X 5" X 11.4", HAZMAT - Bulk